APPLICATIONS

  • SHIELDED ROOMS
  • SCIF
  • SERVER FARMS
  • GOVERNMENT BUILDINGS
  • TEST FACILITIES
  • ELECTRICAL CONTRACTORS
  • COMPUTER PERIPHERAL MANUFACTURERS
  • USAF AND AEROSPACE CONTRACTORS

Genisco EMI/RFI power line filter panels are used in both government and commercial installations to prevent unwanted signals and interference on power lines. Filter panels provide line isolation by using individual phase filters within the panel enclosure.

Enclosures are modified NEMA-type fabricated panels (minimum 14 gauge cold rolled steel), finished in our standard gray colored paint. They include a RF tight inner area, secured with a RF gasket for 100 dB shielding effectiveness (minimum 14 kHz to 18 GHz). The front cover allows easy access to filters and terminal standoffs. Pre-wired standoff, lugs and lifting ears included.

Our panels are built to house our general performance and high attenuation filters that range from 100 dB @ 100 kHz or 100 dB @ 14 kHz. UL Recognized filters are used in panels up to 400 amps. Many high attenuation filter panels also include UL Recognized filters as well.

SPECIFICATIONS AND OPTIONS

Our panel and filter products meet various military specifications and come in a variety of options; however, not all options are available on all models.

NFPA 70/2011 National Electrical Code Standards

Military Specifications

  • MIL-PRF-15733

Military Test Methods

  • MIL-STD-202 Component Parts
  • MIL-STD-220 Insertion Loss
  • MIL-STD-285 Shielding Effectiveness

Available Options for Panels

  • Legs
  • RF Secure Penetration Accessories
  • Surge Suppression

Genisco EMI/RFI power line filter panels are used in both government and commercial installations to prevent unwanted signals and interference on power lines. Filter panels provide line isolation by using individual phase filters within the panel enclosure.

Enclosures are modified NEMA-type fabricated panels (minimum 14 gauge cold rolled steel), finished in our standard gray colored paint. They include a RF tight inner area, secured with a RF gasket for 100 dB shielding effectiveness (minimum 14 kHz to 18 GHz). The front cover allows easy access to filters and terminal standoffs. Pre-wired standoff, lugs and lifting ears included.

Our panels are built to house our general performance and high attenuation filters that range from 100 dB @ 100 kHz or 100 dB @ 14 kHz. UL Recognized filters are used in panels up to 400 amps. Many high attenuation filter panels also include UL Recognized filters as well.

SPECIFICATIONS AND OPTIONS

Our panel and filter products meet various military specifications and come in a variety of options; however, not all options are available on all models.

NFPA 70/2011 National Electrical Code Standards

Military Specifications

  • MIL-PRF-15733

Military Test Methods

  • MIL-STD-202 Component Parts
  • MIL-STD-220 Insertion Loss
  • MIL-STD-285 Shielding Effectiveness

Available Options for Panels

  • Legs
  • RF Secure Penetration Accessories
  • Surge Suppression

APPLICATIONS

  • SHIELDED ROOMS
  • SCIF
  • SERVER FARMS
  • GOVERNMENT BUILDINGS
  • TEST FACILITIES
  • ELECTRICAL CONTRACTORS
  • COMPUTER PERIPHERAL MANUFACTURERS
  • USAF AND AEROSPACE CONTRACTORS